Connector - SCSI-II External Hi D-Sub (Differential)50 PIN HI-DENSITY D-SUB FEMALE at the controller & devices.
50 PIN HI-DENSITY D-SUB MALE at the cable. | (at the controller & devices). |  | (To the cable). |
| Pin | Name | Direction | Description |
|---|
| 01 | GND | --- | Ground | | 02 | +DB0 | --- | +Data Bus 0 | | 03 | +DB1 | --- | +Data Bus 1 | | 04 | +DB2 | --- | +Data Bus 2 | | 05 | +DB3 | --- | +Data Bus 3 | | 06 | +DB4 | --- | +Data Bus 4 | | 07 | +DB5 | --- | +Data Bus 5 | | 08 | +DB6 | --- | +Data Bus 6 | | 09 | +DB7 | --- | +Data Bus 7 | | 10 | +DBP | --- | +Data Bus Parity (odd Parity) | | 11 | DIFFSENS | | ??? | | 12 | res | --- | Reserved | | 13 | TERMPWR | --- | Termination Power | | 14 | res | --- | Reserved | | 15 | +ATN | Input | +Attention | | 16 | GND | --- | Ground | | 17 | +BSY | --- | +Bus is busy | | 18 | +ACK | Input | +Acknowledge | | 19 | +RST | --- | +Reset | | 20 | +MSG | Output | +Message | | 21 | +SEL | --- | +Select | | 22 | +C/D | Output | +Control or Data | | 23 | +REQ | Output | +Request | | 24 | +I/O | Output | +In/Out | | 25 | GND | --- | Ground | | 26 | GND | --- | Ground | | 27 | -DB0 | --- | -Data Bus 0 | | 28 | -DB1 | --- | -Data Bus 1 | | 29 | -DB2 | --- | -Data Bus 2 | | 30 | -DB3 | --- | -Data Bus 3 | | 31 | -DB4 | --- | -Data Bus 4 | | 32 | -DB5 | --- | -Data Bus 5 | | 33 | -DB6 | --- | -Data Bus 6 | | 34 | -DB7 | --- | -Data Bus Parity7 | | 35 | -DBP | --- | -Data Bus Parity (odd Parity) | | 36 | GND | --- | Ground | | 37 | res | --- | Reserved | | 38 | TERMPWR | --- | Termination Power | | 39 | res | --- | Reserved | | 40 | -ATN | Input | -Attention | | 41 | GND | --- | Ground | | 42 | -BSY | --- | -Bus is busy | | 43 | -ACK | Input | -Acknowledge | | 44 | -RST | --- | -Reset | | 45 | -MSG | Output | -Message | | 46 | -SEL | --- | -Select | | 47 | -C/D | Output | -Control or Data | | 48 | -REQ | Output | -Request | | 49 | -I/O | Output | -In/Out | | 50 | GND | --- | Ground |
Note: Direction is Device relative Bus (other Devices).
|
